P 268 rev. 1.0 07-2006Technician Menu
2. Set parameters
2.6 Miscellaneous
2.6 Miscellaneous
2.6.1 Fresh-brew unit data
For the Fresh-brew unit it is possible to set the brewing time,
the drying time for the used dose and the extraction pressure.
2.6.2 Jug facilities
This function is used for setting the number of consecutive
selections (1 to 9; 5 by default) without cup to fill a jug.
2.6.3 Password
This function is used for setting the passwords concerning the
functions described below. These passwords are disabled by
setting the value to 0000.
2.6.3.1 Setting the password
Enter a 5-digit numeric code to be set as password to access
the “Technician menu” mode..
2.6.3.2 Enabling the password
This function is used for enabling or disabling the password
request when accessing the “Technician menu” mode (disabled
by default).
2.6.3.3 Counter reset password
This function is used for setting the password for resetting the
counters set in the Technician menu 2.3.b
2.6.3.4 Jug facility password
This function is used for setting the password for switching the
machine to jug facility mode.
2.6.2 Jug facilities
2.6.3 Password
2.6.3.1 Set password
2.6.3.2 Enable password
2.6.1 FB data
2.6.3.3 Count. reset pwd
2.6.3.4 Jug facility pwd
To Next Page
Loading...
Need help?
General
