P 268 rev. 1.0 07-2006Technician Menu
2. Set parameters
2.3.8 Energy saving
This function is used for saving electric power when the
machine is not in use.
2.3.8.1 Setting the energy saving
This function is used for enabling or disabling the automatic
switch-off of the vending machine boiler during the time when
it is believed the machine would not be used.
2.3.8.2 Energy saving parameters
This function is used for setting the days of the week (1
Monday, 2 Tuesday, 3 Wednesday,etc.) and the time bands (band
1 and 2) when the boiler is to be switched off for energy
saving.
2.3.9 Decaffeinated cycle
When enabling this function, instant coffee powder (if present)
is dispensed in two steps to improve the appearance of the
drink.
2.3.a Equipped base cabinet
When this function is enabled, the machine is configured for
operation with an equipped base cabinet, i.e. with water supply
from a tank inside the base cabinet and control of the liquid
waste container float.
2.3.b Counter maximum number
This function is used for setting the maximum number of
selections to be reached for the purpose of disabling the
machine. The counters can be set for the following selections:
- Espresso
- Instant
- Espresso + Instant
The number of selections made is reset automatically when a
new value is set for the counter.
This function is not active if the counter reset password was
not previously set in the Technician menu 2.6.3.3
2.3.c Enabling lack of coffee
If the function it is possible to enable/disable the indication
on the display “Insert coffee” if the grinder detects the
absence of coffee.
2.3.9 Dec. cycle
2.3.a Eq. cabinet
2.3.8 Energy saving
2.3.8.1 Set energy sav.
2.3.8.2 Energy sav. par.
2.3.B Counter max no.
2.3.c abil. vuoto caffe
To Next Page
Loading...
Need help?
General
