Nederman FlexPAK 1000 Setting Manual

FlexPAK 800/1000EN
22
4.2.2 Set the weekly mer
Weekly mer sets the unit to “Stand By” mode and “O Mode” at preset mes. If the pilot
signal “PS” is acve and the Vacuum unit is in Standby mode, the unit starts.
ESC OK
Thu 10:45
2018-02-01
ESC OK
Stop >
Program >
Setup >
Network >
Diagnoscs >
ESC OK
Set Parameter
Program Name
ESC OK
WeekTmr 1/2
D1 = MTWTF
On1 = 00:00
Off1 = -- --
D2 = MTWTF
On2 = -- --
ESC OK
WeekTmr 2/2
Off2 = -- --
D3 = - - - - -SS
On3 = -- --
Off3 = -- --
Pulse = Off
ESC OK
FlexPak
Hi Vacuum Unit
OFF
Time To Service
2000 hours
ESC OK
WeekTmr >
PresepTm >
MFDPS-Wr >
MFDPS-FC >
BLI-Empt >
BLI-Wr Z
Do the following to set the weekly mer:
1. From the PLC status screen, press the down arrow to go to the date and me
screen.
2. Press ‘Escape’
ESC
to go to the main menu.
3. Press the down arrow to go to ‘Program’. Press ‘OK’
OK
to conrm.
4. Select ‘Set Parameter’. Press ‘OK’
OK
to conrm.
5. Use the up or down arrows to nd ‘WeekTmr’. Press ‘OK’
OK
to conrm.
6. Use right, le, up and down arrows to select a value and change
sengs. Press ‘OK’
OK
to conrm.
NOTE! There are several other input menus on the same level as the date and me screen.
If pressing the down arrow
takes the PLC to one of those menus, use the le arrow
to get to the date and me screen.
Daily AM seng
ESC OK
WeekTmr 1/2
D1 = - - - - - - -
On1 = -- : --
Off1 = -- : --
D2 = - - - - - - -
On2 = -- : --
D1: = MTWTF: Default seng; Monday, Tuesday, Wednesday, Thursday
and Friday.
On1 = Time the unit is set to ‘Standby’ at chosen D1 days. Default seng
is no preset me.
O1 = The me the unit is set to ‘O’ on chosen D1 days. Default seng
is no preset me.
Daily PM seng
ESC OK
WeekTmr 1/2
D1 = - - - - - - -
On1 = -- : --
Off1 = -- : --
D2 = - - - - - - -
On2 = -- : --
D2 = MTWTF: Default seng; Monday, Tuesday, Wednesday, Thursday
and Friday.
On2 = Time the unit is set to ‘Standby’ at chosen D2 days. Default seng
is no preset me.
O2 = The me the unit is set to ‘O’ on chosen D2 days. Default seng
is no preset me.

Nederman FlexPAK 1000 Specifications

General

Brand	Nederman
Model	FlexPAK 1000
Category	Dust Collector
Language	English