Neomitis SR - Auxiliary Heating

INSTALLER SET
6HW&RQÀJ
Factory Setting Values
1 Collector Type
or
2 Cylinder temperature setpoint
From to
3 Temperature difference to switch on the
solar heating
From to
4 Temperature difference to switch off the
solar heating
From to
5 R3 output
or
6 Temperature difference (from the
temp. setpoint) for Auxiliary heating
authorization
From to
7 Language
- - -
- - -
-
Expert Setting Plus
Factory Setting Values
6 Nominal temperature difference for
pump speed control
From to
7 Unit temperature difference for pump
speed control
From to
8 Minimum pump speed ratio
From to
9 Collector temperature test duration (if
tube collector type)
From to
53
SYSTEM 03: Basic solar system with Hydraulic and
Electric auxiliary heating
SYST. 02