INSTALLER SET
SYST. 13
6HW&RQÀJ
Factory Setting Values
1 Collector Type
or
2 Cylinder temperature setpoint
From to
3 R1 output, R1 pump control, ON/OFF
mode (STD) bor speed variation mode
(RPM)
or
4 Temperature difference to switch on the
solar heating
From to
5 Temperature difference to switch off the
solar heating
From to
6 R2 output to valve, Valve way in idle
state
or
7 R3 output
or
8 Temperature difference (from the
temp. setpoint) for Auxiliary heating
authorization
From to
9 Language
- - -
- - -
-
10 Degree unit
or
11 Display / light timeout
- -
- -
Optional function
Factory Setting Values
1 Anti-Legionella function
or
81
SYSTEM 13: Solar system with 2-layer cylinder, 3-way Valve
and Electric auxiliary heating