INSTALLER SET
SYST. 03
Expert Setting Plus
Factory Setting Values
7 T4 temperature zero adjustment value
(if Heat Quantity enabled)
From to
8 Tube collector temperature test duration
(if TUBE type collector)
From to
6HW&RQÀJ
Factory Setting Values
1 Collector Type
or
2 Cylinder temperature setpoint
From to
3 Temperature difference to switch on the
solar heating
From to
4 Temperature difference to switch off the
solar heating
From to
5 R3 output
or
6 Temperature difference (from the
temp. setpoint) for Auxiliary heating
authorization
From to
7 Language
- - -
- - -
-
8 Degree unit
or
9 Display / light timeout
- -
- -
56
SYSTEM 04: Solar system with Solar pump speed control,
Hydraulic Auxiliary and Electric auxiliary heating