Optional function
Factory Setting Values
12 Flow Rate from Meter Reading
From to
Expert Setting
Factory Setting Values
1 Maximum collector temperature
From to
2 Collector temperature safety limit
From to
3 Night temperature setpoint
(for HOLIDAYS mode)
From to
4 Maximum cylinder temperature (safety)
From to
5 Minimum pump-on duration
, or
Expert Setting Plus
Factory Setting Values
1 Collector probe length
2 Temperature difference zero adjustment
value
From to
3 Additional temperature difference zero
adjustment value
(if Heat Quantity enabled)
From to
4 T1 temperature zero adjustment value
From to
5 T2 temperature zero adjustment value
From to
6 T3 temperature. zero adjustment value
From to
55
INSTALLER SET
SYST. 03
To Next Page
Loading...