Neomitis SR - SYSTEM 10: Solar System with Smart Hydraulic Auxiliary from Solid Fuel Boiler and Electric Auxiliary Heating

INSTALLER SET
SYST. 09
Expert Setting Plus
Factory Setting Values
9 Unit temperature difference for pump
speed control
From to
10 Minimum pump speed ratio
From to
11 Tube collector temperature test duration
(if TUBE type collector)
From to
6HW&RQÀJ
Factory Setting Values
1 Collector Type
or
2 Cylinder temperature setpoint
From to
3 R1 output, R1 pump control, ON/OFF
mode (STD) bor speed variation mode
(RPM)
or
4 Temperature difference to switch on the
solar heating
From to
5 Temperature difference to switch off the
solar heating
From to
6 R3 output
or
7 Temperature difference (from the
temp. setpoint) for Auxiliary heating
authorization
From to
8 Temperature difference to switch on the
Auxiliary heating
From to
72
SYSTEM 10: Solar system with Smart Hydraulic auxiliary from
Solid Fuel Boiler and Electric auxiliary heating