Neomitis SR - Page 61

INSTALLER SET
SYST. 05
Expert Setting Plus
Factory Setting Values
1 Collector probe length
2 Temperature difference to switch on the
solar heating from the exchanger
From to
3 Temp. difference to switch off the solar
heating from the exchanger
From to
4 Temperature difference zero adjustment
value
From to
5 Additional temperature difference zero
adjustment value
From to
6 T1 temperature zero adjustment value
From to
7 T2 temperature zero adjustment value
From to
8 T3 temperature zero adjustment value
From to
9 T4 temperature zero adjustment value
From to
10 Nominal temperature difference for
pump speed control
From to
11 Unit temperature difference for pump
speed control
From to
12 Minimum pump speed ratio
From to
13 Tube collector temperature test duration
(if TUBE type collector)
From to
61