Neomitis SR - Page 63

INSTALLER SET
SYST. 06
Optional function
Factory Setting Values
4 Cold start function
or
5 Cold start temperature threshold
From to
Expert Setting
Factory Setting Values
1 Maximum collector temperature
From to
2 Collector temperature safety limit
From to
3 Night temperature setpoint
(for HOLIDAYS mode)
From to
4 Minimum pump-on duration
, or
Expert Setting Plus
Factory Setting Values
1 Collector probe length
2 Temperature difference zero adjustment
value
From to
3 T1 temperature zero adjustment value
From to
4 Nominal temperature difference for
pump speed control
From to
5 Unit temperature difference for pump
speed control
From to
6 Minimum pump speed ratio
From to
7 Tube collector temperature test duration
(if TUBE type collector)
From to
63