INSTALLER SET
SYST. 11
Expert Setting
Factory Setting Values
3 Night temperature setpoint
(for HOLIDAYS mode)
From to
4 Maximum cylinder temperature (safety)
From to
5 Minimum pump-on duration
, or
Expert Setting Plus
Factory Setting Values
1 Length collector probe
2 Temperature difference zero adjustment
value
From to
3 Additional temperature difference zero
adjustment value
From to
4 T1 temperature zero adjustment value
From to
5 T2 temperature zero adjustment value
From to
6 T3 temperature zero adjustment value
From to
7 T4 temperature zero adjustment value
From to
8 Nominal temperature difference for
pump speed control
From to
9 Unit temperature difference for pump
speed control
From to
77
To Next Page
Loading...