INSTALLER SET
SYST. 13
Expert Setting Plus
Factory Setting Values
1 Length collector probe
2 Temperature difference zero adjustment
value
From to
3 Additional Temperature difference zero
adjustment value
From to
4 T1 temperature zero adjustment value
From to
5 T2 temperature zero adjustment value
From to
6 T3 temperature zero adjustment value
From to
7 Nominal temperature difference for
pump speed control
From to
8 Unit temperature difference for pump
speed control
From to
9 Minimum pump speed ratio
From to
10 Tube collector temperature test duration
(if TUBE type collector)
From to
11 Storage cylinder loading test period
From to
83
To Next Page
Loading...