EasyManuals Logo

Nesco Jet Stream JS-3000T User Manual

Nesco Jet Stream JS-3000T
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background image
Should stubborn stains occur in the
base, remove by soaking in a solution of
1
2 cup liquid bleach and 4 cups of water
or use dip-it
®
coffee pot cleaner. DO
NOT use any spray cleaners.
The Liner Pan and Racks
Plastic mesh scrubbing pads may be
used on the wire cooking racks for
baked on foods. The chrome finish on
the racks and nonstick finish on the
liner pan should not require more than
soaking in hot soapy water to remove
stubborn stains. Do not use Easy Off
®
on nonstick metal surfaces.
Light Wash/Pre wash
Use this method for light cleaning jobs
or as a pre-wash to make clean-up easier
for heavy cleaning followed by hand
washing. Place top rack in liner pan,
place bottom rack on top, pour
1
2 tsp.
dish washing liquid into liner pan, add
1
2 cup of warm water, close lid, set
temperature control at 150˚ and fan on
low. Let run for 5-10 minutes.
Disassemble oven, rinse thoroughly to
remove all cleaning residue, and dry.
For heavy cleaning jobs, use method
above as a pre-wash to make clean-up
easier, followed by hand washing. If a lot
of grease has collected in the liner pan
during cooking, wipe out grease with
paper towels before using this cleaning
method. Disassemble oven, rinse thor-
oughly to remove all cleaning residue,
and dry.
The Fan Assembly
The fan assembly requires little
maintenance because there is seldom
the occasion for it to get soiled. In the
event that it requires cleaning, the same
precautions must be taken for cleaning it
as are taken for the liner and racks
(never use abrasive cleaning pads,
cleansers or Easy Off).
To disassemble the fan for cleaning,
unplug from the AC outlet, remove the
wing nut and any washers and then the
fan blade, taking care not to bend it (See
Fig. D). Wash the blade in hot soapy
water, rinse and dry. Wipe the rest of the
assembly with a hot soapy dish cloth,
using care not to get water inside the
unit. Rinse with clean damp cloth.
Do
not immerse the powerhead in water!
Before reattaching the fan blade check
for flatness by spinning it on a flat sur-
face. Gently correct any problems by
pushing down on the blade while on a
hard, flat surface. If the blade is severely
bent and cannot be realigned, call our
toll free number for assistance.
Reattach the fan blade. Take care to
return washers to their proper location
and securely fasten the wing nut (see
Fig. D).
Note: Any other servicing should be performed by an authorized
service representative.
Fig. D
13

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nesco Jet Stream JS-3000T and is the answer not in the manual?

Nesco Jet Stream JS-3000T Specifications

General IconGeneral
ModelJS-3000T
TypeConvection Oven
Power1500 Watts
Voltage120V
Timer60 Minute Timer
FeaturesJet Stream Technology

Related product manuals