OperATION
The panel stores a comprehensive event
memory, including Arming, Disarming, Low
Battery, Mains Fail and Alarm events.
The memory is constantly upgraded and the last
30 events are always available for viewing.
This memory display can only be selected while
the panel is in the Disarmed state.
TO CLEAR THE MEMORY LIGHT
The
MEMORY light flashes continuously
when an alarm has occurred as a reminder to
view the alarm memory. The MEMORY light
stops flashing after the memory is viewed as
shown above.
The MEMORY light is automatically cleared
next time the panel is Armed.
Viewing the EVENT MEMORY
by KEYPAD
Press +
(If the memOry ShOrtcut is enabled)
Or press + [User Code] +
The Exclude light will turn on.
Press ...The most recent event will be displayed.
Press ...The next most recent event will be displayed.
Press ...and so on, up to 30 events.
Press to exit Memory Mode.
To Next Page
Loading...
