Ness eCO8x FeATUres
• 8 alarm zones.
• Supports up to 3 remote keypads.
• 15 user codes can be programmed to
operate by keypad PIN or radio key.
• Optional Ness Radio Interface for fully
integrated wireless security.
• Programmable 2 Area Partitioning can
split the panel into two independent areas
plus a common area.
• Home Mode allows partial arming, (eg,
perimeter security overnight).
• Day Mode feature allows daytime
monitoring of fire doors, coolrooms etc.
• Temporary Day Zone feature allows easy
enabling/disabling of Day Mode.
• Keypad Panic feature.
• Keypad Medical Alarm feature.
• Two button arming feature.
• Fire Alarm feature with different siren
tones.
• Highly flexible zone to output mapping.
• Onboard Vibration Sensor Analyser
with programmable sensitivity. Use with
Nessensor™ vibration sensors.
• Siren chirp and strobe flash on arming
with radio key.
• Quiet chirps option on arm/disarm by
radio key.
• True Dynamic Battery Test actively tests
the battery under load every hour.
• 2 programmable auxiliary outputs.
• Automatic reset fuses.
• Programmable siren/reset lockout.
• 30 event memory from keypad.
• Standard defaults to suit most
applications.
• Easy programming by keypad or
NessComms™ software.
• All programming data is permanently
stored in a non-volatile memory.
• All inputs and outputs are heavily
protected against lightning and high
voltage supply transients.
DIALLER
• Full remote upload/download by PC and
modem using NessComms™ software.
• Contact ID Format for central station
monitoring.
• Audible format feature.
• Phone line monitoring (activates output).
• Dialler ‘Listen in’ option for installers.
• Auto Test calls.
• DTMF dialling.
• True dial tone detection.