Ness Guardpost Installation & Programming Manual

22
Ness Guardpost Installation & Programming
PROGRAMMING OPTIONS
PHONE 1 TELEPHONE NUMBER 1
Applicable when using
central station, audible or
SMS monitoring.
The dialler is disabled if
PHONE 1 or PHONE 2 are
blank.
When the dialler is disabled
the Guardpost will also not
accept SMS operation or
programming commands.
20 digits maximum.
Telephone number 1 is used for reporting alarms to a central monitoring station, audible voice reporting
or SMS reporting to a mobile phone.
• Press ON to view programmed phone number, which be displayed in successive 6-digit segments,
after which the rst segment will be displayed with the rst digit will be ashing.
• Press OFF to leave the number unchanged and step to the next option.
• Press ON to step through values for the rst digit:
• Press PANIC to store the rst digit. The second digit will ash.
• Repeat for each digit (the display will scroll left after the fourth digit is entered).
• Press ON to store the last digit, then press OFF, which returns to PHONE 1
• Press OFF to step to next option, or repeat procedure to make corrections.
• The phone number can be deleted by reprogramming each digit with a PAUSE.
Allowable digits
- PAUSE
0-9 digits 0-9
* STAR
H HASH
+ Dials the international access prex
PHONE 2 TELEPHONE NUMBER 2
Applicable when using
central station, audible or
SMS monitoring.
The dialler is disabled if
PHONE 1 or PHONE 2 are
blank.
When the dialler is disabled
the Guardpost will also not
accept SMS operation or
programming commands.
20 digits maximum.
Telephone number 2 is used as a secondary phone number for reporting alarms to a central monitoring
station, audible voice reporting or SMS reporting to a mobile phone.
• Press ON to view programmed phone number, which be displayed in successive 6-digit segments,
after which the rst segment will be displayed with the rst digit will be ashing.
• Press OFF to leave the number unchanged and step to the next option.
• Press ON to step through values for the rst digit:
• Press PANIC to store the rst digit. The second digit will ash.
• Repeat for each digit (the display will scroll left after the fourth digit is entered).
• Press ON to store the last digit, then press OFF, which returns to PHONE 1
• Press OFF to step to next option, or repeat procedure to make corrections.
• The phone number can be deleted by reprogramming each digit with a PAUSE.
Allowable digits
- PAUSE
0-9 digits 0-9
* STAR
H HASH
+ Dials the international access prex
GSM SG GSM SIGNAL STRENGTH
Range 0-9
0, low signal
9, best signal
Indicates GSM signal strength.
ABORT DIALLER ABORT DELAY
Applicable when using
central station, Audible or
SMS monitoring.
Sub-menu
0 SEC
5 SEC (DEFAULT)
...
to 60 SEC
in 5 second steps
Dialler abort delay gives the opportunity to abort sending an alarm message to the central monitoring
station within the programmed time (i.e. to cancel a false alarm).

Ness Guardpost Specifications

General

Brand	Ness
Model	Guardpost
Category	Security System
Language	English