Net DVR DVR7004 User Manual

1
Net DVR
Preface
Thank you for selecting our products. We will offer the best service for you wholeheartedly.
This manual applies to DVR7000series, and we take 8 channel DVR (DVR7008M) as a sample. In this series, different product models’
configuration will have a little difference, and it will work the difference between product function and operation.
It is for reference only. We will not provide any new information separately for later firmware update. The updating files will be added into the new
edition of the user manual and will also be posted on our website in the download center. This user manual may have some inaccuracy or misprint. We
sincerely hope your timely feedback and comments to let us correct and improve this booklet in the subsequent edition.

Net DVR DVR7004 Specifications

General

Hard Drive Support	1 SATA HDD
Channels	4
Video Compression	H.264
Remote Viewing	Yes
Power Supply	DC 12V
Video Input	4
Audio Input	4
Audio Output	1 channel RCA
Mobile Support	Yes
Network Interface	RJ45
USB Interface	2 USB 2.0

Summary

Preface

Chapter 1: Brief Introduction to the DVR

Summarization

Overview of the DVR7000 series digital video recorder and its key features.

Product Introduction

Detailed specifications and feature comparison for various DVR7000 series models.

Chapter 2: Technology Guideline and Main Functions

Technology Guideline

Technical specifications for video, audio, compression, interfaces, and operation modes.

Main Functions

Key features including compression, recording modes, playback, and display capabilities.

Chapter 3: Equipment Installation and Illustration

Installation Environment and Cautions

Guidelines for proper installation location, temperature, humidity, and ventilation.

Back Panel Instructions

Description of ports and connections on the DVR back panel for various devices.

Front Panel Description

Overview of the DVR's front panel buttons, indicators, and layout.

Mouse Operation

Instructions on using the mouse for system navigation, selection, and input.

IR Remote Control

Layout and function of the infrared remote control for DVR operation.

Menu Operation Description

Explanation of the menu structure and option scheduling for system configuration.

Chapter 4: Device Operation

Power On/Off, Login, and Lock

Procedures for powering the DVR on/off, logging in, and system locking.

General Setup

Configuration settings for overwrite, auto-lock, video format, resolution, and display contrast.

Time Setup

Setting the system date, time, and network time synchronization (NTP).

Record Setup

Parameters for record modes, manual, schedule, motion detection, and quality settings.

Output Setup

Settings for display, digital zoom, sequence cruise, and video parameter adjustments.

Alarm Setup

Configuration for motion detection, sensor alarms, alarm output, and email notifications.

COM Setup

Configuration for serial communication ports (RS485, RX) and PTZ control.

Network Setup

Settings for IP, DDNS, and PPPOE connections for network access.

Playback

Instructions on accessing and viewing recorded video files using different search methods.

System Management

User management, backup, disk management, restore defaults, and password reset procedures.

System Information

Displaying software version, record status, alarm status, online status, and log information.

Software Upgrade

Procedures for upgrading the DVR firmware via client software or USB.

Power Resume

Functionality for automatic system restart and status restoration after power interruption.

Appendix 1: IE Operation Instructions

LAN Configuration for IE Browse

Steps to access the DVR via Internet Explorer on a local network.

WAN Operation Instructions

Instructions for configuring network access to the DVR over a wide area network.

Appendix 2: Net DVR Q&A