Doc. Name: NMC-PRO
Installation Manual Revision: 2 Page: 19
Crop Management Technologies
If you choose SD Card, the following screen appears:
a. Select the required software.
b. Press Enter.
The following screen appears:
c. Select the required software version.
d. Press Enter.
2. A confirmation message appears. Select Yes.
3. Press Enter.
Note: Do not turn the unit off during the update! If there is an interruption (for example a
power outage), restart the process.
4. At the end of the process, the following screen appears (the version numbers are
examples only):
NMC80200.HEX 5608K 06/Apr/2011
NMC_PRO <DIR> 13/Oct/2009
To Next Page
Loading...
