Doc. Name: NMC-PRO
Installation Manual Revision: 2 Page: 1
Crop Management Technologies
INTRODUCTION
NMC Pro Climate is a climate controller that brings to the user the tool to control the
climate condition to the optimum desired level inside the climate zone. NMC Pro Climate is
designed to control up to 4 climate zones in a single controller.
Getting Started…
Installation should be performed by authorized technicians only.
Verify that all components are working properly.
All safety regulations are to be applied.
Do not apply force or pressure on components during the installation procedure.
Refer to your supervisor if problems occur during installation procedure.
MAIN MENU SCREEN
1. PROGRAM 2. MANUAL 3. ALARMS 4. STATUS
5. LOG&HIS 6. TEST 7. SETUP 8. INSTALL
To Next Page
Loading...
