Netafim NMC PRO CLIMATE - User Level Access

NMC-PRO
INSTALLATION GUIDE
Doc. Name: NMC-PRO
׀
Installation Manual Revision: 2 Page: 2
Crop Management Technologies
USER LEVEL ACCESS
There are three access levels:
• Read Only (restricted)
All the parameters and menus are visible, but cannot be modified
• User (limited restriction)
Menus 1-7 are fully accessible and can be modified. Menu 8 can be viewed but not
edited
• Technician (unrestricted)
All menus are fully accessible and available for modifications
To change the operation mode:
1. On the main menu press the LOG IN key.
2. Use arrow keys to select YES.
3. Press ENTER
The controller recognizes the operation mode
according to the password that is entered:
USER LEVEL PASSWORD
Read Only 0000
User 9785 or 0101
USER LEVEL: READ ONLY
Change user level access?
Yes No
Program Ver.: 8.2.81
USER LEVEL: READ ONLY
Please Enter Password
Program Ver.: 8.2.81