NETGEAR C3000 User Manual

Supplemental Information
101
N300 WiFi Cable Modem Router Model C3000
Factory Default Settings
You can return the modem router to its factory default settings.
 To restore the factory default settings:
1. Locate the small hole in the bottom of the modem router
.
The Reset button is located inside this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for over seven seconds.
Designed by NETGEAR in California
The modem router resets and returns to the factory configuration settings shown in the
following table.
Factory Default Settings
Gateway login User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin / password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address

NETGEAR C3000 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	340 Mbit/s
Power source type	DC
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Security algorithms	WPA, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Cables included	LAN (RJ-45)
Product type	Tabletop router
Product color	Black

Weight and Dimensions

Depth	41 mm
Width	113 mm
Height	193 mm
Weight	352 g