EasyManuals Logo

NETGEAR C3000 User Manual

NETGEAR C3000
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Manage Your Network
71
N300 WiFi Cable Modem Router Model C3000
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED.
The Wireless Settings (2.4 GHz) pane displays the following information:
Name (SSID). The wireless network name (SSID) that the modem router uses.
Region. The geographic region where the modem router is being used. It is illegal to
use the wireless features of the modem router in some parts of the world.
Channel. The operating channel of the wireless port being used. The default channel
is Auto. When Auto is selected, the modem router finds the best operating channel
available.
Mode. The wireless communication mode: Up to 54 Mbps, Up to 145 Mbps (default),
and Up to 300 Mbps.
Wireless AP. Indicates whether the modem router WiFi radios are on or off. If the
wireless radios are turned off, the WiFi On/Off LED on the front panel is off.
Broadcast Name. Indicates whether the modem router is broadcasting its SSID.
Wireless Isolation. Indicates if wireless isolation is enabled. When wireless isolation
is enabled, wireless clients can connect to the Internet, but cannot access each other
or access Ethernet devices on the network.
Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for
this network.
View Guest Network Settings
To view wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED.
The Guest Network (2.4 GHz) pane displays the following information:
Name (SSID). The wireless network name (SSID) that the modem router uses.

Table of Contents

Other manuals for NETGEAR C3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR C3000 and is the answer not in the manual?

NETGEAR C3000 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)340 Mbit/s
Power source typeDC
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Security algorithmsWPA, WPA2-PSK
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Cables includedLAN (RJ-45)
Product typeTabletop router
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth41 mm
Width113 mm
Height193 mm
Weight352 g

Related product manuals