Specify Network Settings
50
N300 WiFi Cable Modem Router Model C3000
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or modem router.
7. Click the Apply button.
Your changes are saved.
If you changed the LAN IP address of the modem router, you are disconnected when this
change takes effect.
To reconnect, close your browser, relaunch it, and log in to the modem router.
Specify the IP Addresses That the Modem Router Assigns
By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server.
The modem router assigns IP, DNS server, and default gateway addresses to all computers
connected to the LAN. The assigned default gateway address is the LAN address of the
modem router.
These addresses must be part of the same IP address subnet as the modem router’s LAN IP
address. Using the default addressing scheme, define a range between 192.168.0.2 and
192.168.0.254, although you can save part of the range for devices with fixed addresses.
To specify the pool of IP addresses that the modem router assigns:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
