Control Access to the Internet
32
N300 WiFi Cable Modem Router Model C3000
4. Select ADVANCED > Security > E-mail.
5. Select the Turn E-mail Notification On check box.
6. In the Y
our Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail
server (such as mail.myISP.com).
You might be able to find this information in the configuration screen of your email
program. If you leave this field blank, the modem router does not send logs.
7. Enter the email address to which logs and alerts are sent in the Send to This E-mail
Address field.
This email address is also used for the From address. If this field is blank, the modem
router does not send logs.
8. If your outgoing email server requires authentication, select the My Mail Server requires
authentication check box.
a. In the User Name field, type the user name for the outgoing email server
.
b. In the Password field, type the password for the outgoing email server
.
9. T
o send alerts when someone attempts to visit a blocked site, select the Send Alerts
Immediately check box.
10. T
o send logs based on a schedule, specify these settings:
• In the Send logs according to this schedule list, select the schedule type.
• From the Day list, select the day.
• From the T
ime list, select the time, and select the am or pm radio button.
11. Click the Apply button.
Your settings are saved.
The modem router sends logs automatically. If the log fills up before the specified time,
the modem router sends it.
After the log is sent, it is cleared from the modem router
memory. If the modem router cannot email the log and the log buffer fills up, the modem
router overwrites the log.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
