Table 1. LED descriptions
DescriptionLED
• Solid White. The cable modem router is receiving power and is functioning normally.
• Off.The cable modem router is not receiving power.
• Solid red.The cable modem router is too warm and might overheat. Power off the cable modem router,
let it cool, and move it away from heat sources (such as a TV, DVD player, or speakers).
Power
• Solid amber. One downstream channel is locked.
• Solid blue.Two or more downstream channels are locked.
• Blinking blue.The cable modem router is scanning for a downstream channel.
• Off. No downstream channel is locked.
Downstream
• Solid amber. One upstream channel is locked.
• Solid blue.Two or more upstream channels are locked.
• Blinking blue.The cable modem router is scanning for an upstream channel.
• Off. No upstream channel is locked.
Upstream
• Solid blue.The cable modem router is online.
• Blinking blue.The cable modem router is synchronizing with the cable provider’s cable modem router
termination system (CMTS).
• Off.The cable modem router is offline.
Internet
You can use the ring LED located on the top of the cable modem router to determine the sync sta
Orbi Satellite Model RBS20 LEDs
The following table describes the Power LED and Ring LED behavior for an Orbi satellite.
Hardware Setup
10
Orbi WiFi System
To Next Page
Loading...
Need help?
General
