NETGEAR CBK40 User Manual

Table 5. Factory default settings for the cable modem router (Continued)
Default SettingFeature
EnabledWiFi communicationWiFi
See cable modem router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States in the USCountry/region
2.4GHz front and back haul: Auto
5 GHz front haul: Channel 48
5 GHz back haul: Channel 157
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Factory Settings for Orbi Satellite Model RBS20
The following table shows the factory default settings for the satellite.
Table 6. Factory default settings for the satellite
Default SettingFeature
orbilogin.comUser login URLRouter
login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.250LAN IPLocal
network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
Supplemental Information
98
Orbi WiFi System

NETGEAR CBK40 Specifications

General

Brand	NETGEAR
Model	CBK40
Category	Modem
Language	English