Table 6. Factory default settings for the satellite (Continued)
Default SettingFeature
Disabled (except traffic on port
80, the HTTP port)
Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
EnabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
2
Transmission speed
United States in the USCountry/region
2.4 GHz front and back haul: Auto
5 GHz front haul: Channel 48
5 GHz back haul: Channel 157
RF channel
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Technical Specifications
The following are the technical specifications for Orbi cable modem router and satellite.
Technical Specifications for Orbi Cable Modem Router
The following table shows the technical specifications for the cable modem router.
Table 7. Cable modem router specifications
DescriptionFeature
TCP/IP, DHCP, Dynamic DNS, and UPnPData and routing protocols
120V, 60 Hz, inputPower adapter
6.7 x 3.1 x 8.89 in. (170.3 x 78.9 x 225.8 mm) eachDimensions
2.15 lb (975.2 g)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
Supplemental Information
99
Orbi WiFi System
To Next Page
Loading...
Need help?
General
