NETGEAR CBK40 User Manual

Enable Standard Parental Controls
NETGEAR's standard parental controls is an OpenDNS parental control that let's you to change the web
filtering level for each device on the network. To set up standard parental controls, you must download the
NETGEAR genie app on your mobile device. For more information about NETGEAR's standard parental
controls, visit http://www.netgear.com/lpc.
To enable standard parental controls:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the Orbi admin user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Parental Controls.
The Parental Controls page displays.
5. Move the slider to the right to enable Standard Parental Controls.
You can only enable one parental controls service.Note
6. Click the Apply button.
7. Download the NETGEAR genie app on your mobile device.
For more information, see http://www.netgear.com/lpc.
8. Launch the NETGEAR genie app.
9. Tap Parental Controls.
Follow the prompts to setup parental controls.
Allow or Block Access to Your Network
You can use access control to block access to your network.
To set up access control:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
Control Access to the Internet
30
Orbi WiFi System

NETGEAR CBK40 Specifications

General

Brand	NETGEAR
Model	CBK40
Category	Modem
Language	English