4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the ERASE button.
The factory default settings are restored. The user name is admin, the password is password, and the
LAN IP address is 192.168.1.1. DHCP is enabled.
Restore Configuration Settings
To restore configuration settings that you backed up:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Browse button to find and select the .cfg file.
6. Click the RESTORE button.
The file is uploaded to the cable modem router and the cable modem router reboots.
WARNING:
Do not interrupt the reboot process.
Set Up Remote Management
You can access your cable modem router over the Internet to view or change its settings.You must know
the cable modem router’s WAN IP address to use this feature. For information about Dynamic DNS, see
Dynamic DNS on page ?.
Be sure to change the password for the user name admin to a secure password.The
ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
See Change the admin Password on page 60.
Note
Manage Your Network
69
Orbi WiFi System
To Next Page
Loading...
Need help?
General
