EasyManuals Logo

NETGEAR DGN2000 User Manual

NETGEAR DGN2000
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
1-6 Connecting Your Router to the Internet
v1.0, July 2008
2. To save your settings, click Apply.
3. Click Test to verify your Internet connection. If you have trouble connecting to the Internet,
see Chapter 6, “Troubleshooting.”
Viewing or Manually Configuring Your ISP Settings
NETGEAR recommends that you specify your country and language before you configure the
settings on the Basic Settings screen. See “Logging In to the Wireless Modem Router” on
page 1-3. You must install the ADSL filters and connect the modem router to the ADSL line as
described in the Wireless-N ADSL2+ Modem Router DGN2000 Setup Manual before you
configure the settings in the Basic Settings screen.
To view or configure the basic settings:
1. Log in to the modem router as described in “Logging In to the Wireless Modem Router” on
page 1-3.
2. Select Basic Settings to display the Basic Settings screen.
The Basic Settings screen is explained in “Understanding the Basic Settings Screen” on
page 1-8.
Fixed IP (Static) Account Setup
1. If required, enter the account name and domain name from
your ISP.
2. Select Use Static IP Address or Use IP Over ATM (IPoA —
RFC1483 Routed) according to the information from your ISP.
If you select IPoA, the router will detect the gateway IP
address, but you still need to provide the router IP address.
3. Enter your assigned IP address, subnet mask, and the IP
address of your ISP’s gateway modem router. This information
should have been provided to you by your ISP.
4. Enter the IP address of your ISP’s primary DNS server. If a
secondary DNS server address is available, enter it also.
DNS servers are required to perform the function of translating
an Internet name such as
www.netgear.com to a numeric IP
address. For a fixed IP address configuration, you must obtain
DNS server addresses from your ISP and enter them manually
here.
Table 1-1. Auto-Detected Internet Connection Types (continued)
Connection Type ISP Information

Table of Contents

Other manuals for NETGEAR DGN2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR DGN2000 and is the answer not in the manual?

NETGEAR DGN2000 Specifications

General IconGeneral
BrandNETGEAR
ModelDGN2000
CategoryNetwork Router
LanguageEnglish

Related product manuals