5-1
v1.0, July 2008
Chapter 5
Advanced Configuration
This chapter describes how to configure the advanced features of your DGN2000 Wireless-N
ADSL2+ Modem Router.
Configuring Advanced Security
The modem router provides a variety of advanced features, which are described in the following
sections:
• “Setting Up a Default DMZ Server” on page 5-2”
• “Connecting Automatically, as Required” on page 5-3”
• “Disabling Port Scan and DOS Protection” on page 5-3”
• “Responding to a Ping on an Internet WAN Port” on page 5-4”
• “Setting the MTU Size” on page 5-4”
• “Disabling the SIP ALG” on page 5-4”
• “Configuring LAN IP Settings” on page 5-4”
• “Configuring DHCP” on page 5-6”
• “Configuring LAN TCP/IP Settings” on page 5-8”
• “Configuring Dynamic DNS” on page 5-9”
• “Using Static Routes” on page 5-10”
• “How to Configure Universal Plug and Play” on page 5-13”
• “Building Wireless Bridging and Repeating Networks” on page 5-14”
• “Displaying and Configuring Advanced WPS Settings” on page 5-20”
These features are discussed in the following sections.
To Next Page
Loading...
Need help?
General
