Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
2-12 Configuring Your Wireless Network and Security Settings
v1.0, July 2008
unwanted access to your network, but the data broadcast over the wireless link is fully
exposed.The Wireless Station Access list determines which wireless hardware devices will be
allowed to connect to the modem router.
To restrict access based on MAC addresses:
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
2. In the Wireless Settings screen, under the Wireless Station Access List section, click the Setup
Access List button to display the list.
3. Select the Turn Access Control On check box to enable the restricting of wireless computers
by their MAC addresses.
Note: If you configure the modem router from a wireless computer, add your com-
puter’s MAC address to the access list. Otherwise you will lose your wireless
connection when you click Apply. You must then access the modem router
from a wired computer, or from a wireless computer that is on the access con-
trol list, to make any further changes.
Figure 2-3
To Next Page
Loading...
Need help?
General
