Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
Advanced Configuration 5-15
v1.0, July 2008
Here are some examples of wireless bridged configurations:
• Point-to-point bridge. The modem router communicates with another bridge-mode wireless
station. See “How to Configure a Point-to-Point Bridge Configuration.”
• Multi-point bridge. The modem router is the “master” for a group of bridge-mode wireless
stations. Then all traffic is sent to this master, rather than to other access points. See “How to
Configure a Multi-Point Bridge.”
• Repeater with wireless client association. Sends all traffic to the remote access point. See
“How to Configure a Repeater with Wireless Client Association.”
To view or change these configurations, select Advanced Wireless Settings from the main menu:
Note: The wireless bridging and repeating feature uses the default security profile to send
and receive traffic.
Figure 5-9
To Next Page
Loading...
