NETGEAR DM111P User Manual

Broadband ADSL2+ Modem User Manual
1-2 Configuring Your Internet Connection
v1.0, October 2014
• For Qwest customers, please call 1-877-348-9005.
• For Verizon customers, please call 1-800-567-6789.
NETGEAR modem and gateway products are designed to be compatible with major ISPs in North
America including Earthlink, AT&T, Qwest, and Verizon. For any NETGEAR product installation
support and compatibility concerns, please call NETGEAR at 1-888-NETGEAR, as ISP support
for NETGEAR products may be limited. Please only call your ISP to obtain the log in user name
and password.
Using the Smart Wizard to Set Up Your Modem
For first-time installation of your modem refer to the Broadband ADSL2+ Modem Setup Manual.
The Setup Manual explains how to launch the NETGEAR Smart Wizard on the Resource CD to
step you through the procedure to connect your modem and computer. The Smart Wizard will
assist you in configuring your wireless settings and enabling wireless security for your network.
After initial configuration using the Setup Manual, you can use the information in this manual to
configure additional features of your modem.
For installation instructions in a language other than English, see the language options on the
Resource CD.
Logging In to the Modem
You can log in to the modem to view or change its settings.
1. On your PC, open a Web browser, such as Microsoft Internet Explorer, and type the URL
http://192.168.0.1 in the address box. A dialog screen will be displayed prompting you for a
user name and password.
Note: The Smart Wizard cannot detect a PPTP connection with your ISP. If your ISP uses
this protocol, then you must use Quick Setup to configure your connection manu-
ally. See “Using Quick Setup to Configure the Modem” on page 1-6.
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online
document in “Preparing Your Network” in Appendix B.

NETGEAR DM111P Specifications

Power

power requirements	12V DC, 1.0A
power adapter localization	Plug is localized to country of sale, RoHS compliant

Operating Environment

operating temperature	0° to 40°C (32 to 104ºF)
non-operating temperature	-20° C to 70° C
operating humidity	10-90% relative humidity, noncondensing
non-operating humidity	5-95% relative humidity, noncondensing

System Memory

flash memory	2 MB
DRAM	8 MB

Weight and Dimensions

height	3.0 cm
width	14.1 cm
depth	9.3 cm
weight	190 g (0.67 lb)