NETGEAR DM111P User Manual

Managing Your Modem 2-1
v1.0, October 2014
Chapter 2
Managing Your Modem
This chapter describes how to perform management tasks on your Broadband ADSL2+ Modem
DM111Pv2.
All sections in this chapter refer to functions in the modem management utility, and assumes the
utility has been opened in your web browser, as described in “Logging In to the Modem” on
page 1-2.
This chapter includes:
• “Changing the Password” in the following section.
• “Backing Up, Restoring, or Erasing Your Settings” on page 2-2.
• “Upgrading the Modem’s Firmware” on page 2-3.
• “Network Management Information” on page 2-5.
• “Running Diagnostic Utilities and Rebooting the Modem” on page 2-8.
• “Configuring Remote Access” on page 2-10.
Changing the Password
To keep your modem configuration settings secure, you can change the password needed to access
the modem management utility, as follows:
1. Click Set Password in the Maintenance section of the main menu.
Figure 2-1

NETGEAR DM111P Specifications

Power

power requirements	12V DC, 1.0A
power adapter localization	Plug is localized to country of sale, RoHS compliant

Operating Environment

operating temperature	0° to 40°C (32 to 104ºF)
non-operating temperature	-20° C to 70° C
operating humidity	10-90% relative humidity, noncondensing
non-operating humidity	5-95% relative humidity, noncondensing

System Memory

flash memory	2 MB
DRAM	8 MB

Weight and Dimensions

height	3.0 cm
width	14.1 cm
depth	9.3 cm
weight	190 g (0.67 lb)