NETGEAR DM111P User Manual

Broadband ADSL2+ Modem User Manual
2-2 Managing Your Modem
v1.0, October 2014
2. Type the new password where prompted, and click Apply.
Backing Up, Restoring, or Erasing Your Settings
The configuration settings of the modem are stored in a configuration file in the modem. This file
can be backed up to your computer, restored, or reverted to factory default settings. The
procedures below explain how to do these tasks.
Backing Up the Configuration to a File
1. From the Maintenance heading of the Main Menu, select the Backup Settings menu as seen in
Figure 2-2.
2. Click Backup to save a copy of the current settings.
3. Store the
.cfg file on a computer on your network.
Restoring the Configuration from a File
1. From the Maintenance heading of the Main Menu, select the Settings Backup menu as seen in
Figure 2-2.
2. Enter the full path to the file on your network or click the Browse button to locate the file.
3. When you have located the
.cfg file, click the Restore button to upload the file to the modem.
Figure 2-2

NETGEAR DM111P Specifications

Power

power requirements	12V DC, 1.0A
power adapter localization	Plug is localized to country of sale, RoHS compliant

Operating Environment

operating temperature	0° to 40°C (32 to 104ºF)
non-operating temperature	-20° C to 70° C
operating humidity	10-90% relative humidity, noncondensing
non-operating humidity	5-95% relative humidity, noncondensing

System Memory

flash memory	2 MB
DRAM	8 MB

Weight and Dimensions

height	3.0 cm
width	14.1 cm
depth	9.3 cm
weight	190 g (0.67 lb)