Get Started
22
AC1200 WiFi Range Extender
If Smart Setup detects any networks in the 5 GHz band, it displays them.
9. Select a 5 GHz WiFi network to extend, and click the Continue button.
Note: If your router does not support the 5 GHz band (not all routers do) or
you want to set up the 5 GHz extender network later, click the Skip
button, and go to Step 11 on page 23.
10. Enter the security settings for the existing 5 GHz network:
• If the network uses WPA-PSK, WPA2-PSK, or a combination of these options, do the
following:
a. In the
Password (network key) field, type the network passphrase (also called
a password or network key).
b. Click the Continue button.
• If the network uses WEP
, do the following:
a. From the Encryption Strength menu, select the encryption strength (
64 bit or
128 bit).
To Next Page
Loading...
