NETGEAR EX6200 - Page 70

Manage the Extender Network and Security Settings
70
AC1200 WiFi Range Extender
5. Select a 2.4 GHz WiFi network to extend, and click the Continue button.
6. Enter the security settings for the existing 2.4 GHz network:
• If the network uses WPA-PSK, WPA2-PSK, or a combination of these options, do the
following:
a. In the
Password (network key) field, type the network passphrase (also called
a password or network key).
b. Click the Continue button.
• If the network uses WEP
, do the following:
a. From the Encryption Strength menu, select the encryption strength (
64 bit or
128 bit).
b. Select the radio button that corresponds to the key that you want to use (Key 1,
Key 2, Key 3, or Key 4).
c. Next to the selected radio button, enter the network WEP key
.
d. Click the Continue button.
If Smart Setup detects any networks in the 5 GHz band, it displays them.
7. Select a 5 GHz WiFi network to extend, and click the Continue button.