Manage Device Security
242
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
The range of the VLAN ID is 2–4093.
10. Click the Apply button.
Your settings are saved.
The Operational VLAN(s) field displays the operational VLANs.
Configure a Private VLAN Promiscuous Interface
 To configure a private VLAN promiscuous interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private Vlan Promiscuous Interface
Configuration.
The Private VLAN Promiscuous Interface Configuration page displays.
6. To display information for all ports and LAGs, click the All link.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row.
8. In the Promiscuous Primary VLAN field, enter the primary VLAN ID for the promiscuous
association mode.
The range of the VLAN ID is 2–4093.
9. In the Promiscuous Secondary VLAN(s) field, enter the secondary VLAN ID for
promiscuous association mode.
This field can accept single a VLAN ID, a range of VLAN IDs, or a combination of both in
sequence separated by a comma. You can specify an individual VLAN ID, such as 10.
To Next Page
Loading...
Need help?
General
