NETGEAR GC110 User Manual

Hardware Specifications and Default Values
367
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
MST Instance 0 Priority 32768
MST Instance 0 VLAN IDs 1,2,3
PV(R)STP UplinkFast Rate 150
Interface
CST STP Status Enabled
CST Auto Edge Enabled
CST Fast Link Disabled
CST BDPU Forwarding Disabled
CST Path Cost 0
CST Priority 128
CST External Path Cost 0
Interface
Port GVRP Mode Disabled
Link Aggregation
Lag Name ch<n> where n is 1 to 5
Admin Mode Enabled
STP Mode Enabled
Link Trap Enabled
LAG Type Static
Local Link Discovery Protocol (LLDP)
Global
TLV Advertised Interval 30
Hold Multiplier 4
Reinitializing Delay 2
Transmit Delay 5
Fast Start Duration 3
Interface
Admin Status Tx and Rx
Management IP Address Auto Advertise
Table 80. Feature Default Values and Default State (continued)
Feature Name/Parameter Default

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries