NETGEAR GC110 User Manual

Hardware Specifications and Default Values
371
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Interface
Trust Mode 802.1p
Interface Shaping Rate 0
802.1p to Queue Mapping (802.1p –> Queue) 0 -> 1
1 -> 0
2 -> 0
3 -> 1
4 -> 2
5 -> 2
6 -> 3
7 -> 3
Queue Minimum Band Width 0
Queue Scheduler Type Weighted
Auto-VoIP Protocol-based
Admin Mode Disabled
Prioritization Type Traffic Class
Traffic Class 3
Auto-VoIP OUI-based
Admin Mode Disabled
Auto-VoIP VLAN 2
OUI-based priority 7
Table 81. Port characteristics
Feature Sets Supported Default
Auto negotiating speed and
full/half duplex
All ports Auto negotiation
Auto MDI/MDIX for cross over cables on all ports Enabled
802.3x flow control/back pressure 1 (per system) Disabled
Port mirroring: TX, RX, Both 5 Disabled
Port trunking (aggregation) 8 Pre-configured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Enabled
802.1s spanning tree 4 instances Disabled
Table 80. Feature Default Values and Default State (continued)
Feature Name/Parameter Default

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries