NETGEAR GC110 User Manual

Configure System Information
81
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System> Services > DHCP L2 Relay > DHCP L2 Relay Global Configuration.
The DHCP L2 Relay Global Configuration page displays.
6. Select one or more VLANs, or select all VLANs by selecting the check box in the table
heading.
7. From the Admin Mode menu, select to enable or disable the DHCP L2 relay on the
selected VLAN or VLANs.
The default is Disable.
8. From the Circuit ID Mode menu, select to enable the interface number to be added as the
circuit ID in DHCP option 82 or to disable the interface number from being added as the
circuit ID in DHCP option 82.
The default is Disable.
9. In the Remote ID String field, enter a remote ID description of up to 32 characters.
10. Click the Apply button.
Your settings are saved.
Configure the DHCP L2 Relay Interface Settings
You can configure the DHCP L2 relay interface settings.
 To configure the DHCP L2 relay interface settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’s password in the password field.

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries