Hardware Specifications and Default Values
427
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Interface
Trust Mode 802.1p
Interface Shaping Rate 0
802.1p to Queue Mapping (802.1p –> Queue) 0 -> 1
1 -> 0
2 -> 0
3 -> 1
4 -> 2
5 -> 2
6 -> 3
7 -> 3
Queue Minimum Band Width 0
Queue Scheduler Type Weighted
Auto-VoIP Protocol-based
Admin Mode Disabled
Prioritization Type Traffic Class
Traffic Class 3
Auto-VoIP OUI-based
Admin Mode Disabled
Auto-VoIP VLAN 2
OUI-based priority 7
Table 95. Port characteristics
Feature Sets Supported Default
Auto negotiating speed and
full/half duplex
All ports Auto negotiation
Auto MDI/MDIX for cross over cables on all ports Enabled
802.3x flow control/back pressure 1 (per system) Disabled
Port mirroring: TX, RX, Both 5 Disabled
Port trunking (aggregation) 8 Pre-configured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Enabled
802.1s spanning tree 24 and 8 MST instances Disabled
Table 94. Feature Default Values and Default State (continued)
Feature Name/Parameter Default
To Next Page
Loading...
