NETGEAR GC728X

Hardware Specifications and Default Values
428
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Static 802.1Q tagging 256 VID = 1
Max member ports are equal to
the number of ports on the switch.
Learning process Supports static and dynamic MAC
entries
Dynamic learning is enabled by
default
Table 96. Traffic control
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports Disabled
Max = 9216 bytes
Table 97. Quality of service
Feature Sets Supported Default
Number of queues 7 N/A
802.1p 1 Enabled
DSCP 1 Disabled
Rate limiting All ports Disabled
Table 98. Security
Feature Sets Supported Default
802.1X All ports Disabled
MAC ACL 100 (shared with IP and IPv6
ACLs)
All MAC addresses allowed
IP ACL 100 (shared with MAC and IPv6
ACLs)
All IP addresses allowed
IPv6 ACL 100 (shared with IP ACL and MAC
ACL)
All IP addresses allowed
Password control access 1 Idle timeout = 5 mins.
Password = “password”
Table 95. Port characteristics
Feature Sets Supported Default