NETGEAR LM1200 User Manual

To view APN profiles or add a custom APN profile for a service provider network:
1.
Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client
from a router that is connected to the modem.
2.
In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3.
Enter the modem password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
5. Select Settings > Mobile > APN.
The APN page displays.
6.
To see details about the active APN profile, click the Details button.
If you did not yet add a custom APN profile, the default profile is the active APN
profile.
7.
To add a custom APN profile, click the Add button.
8.
Enter the settings for the new APN profile as described in the following table.
User Manual23Manage the Mobile Broadband
Connection
NETGEAR 4G LTE Modem LM1200

NETGEAR LM1200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
4G standard	LTE
3G standards	HSPA+
Mobile network generation	4G
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), USB Type-C
Output current	2 A
Output voltage	5 V
Power consumption (typical)	- W
Product color	White
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	116 mm
Height	32.25 mm
Weight	180 g