NETGEAR LM1200 User Manual

5. Select Settings > Mobile > SIM Security.
6. Click the Update SIM PIN link.
7.
In the Current SIM PIN field, enter the old PIN.
8.
In the New SIM PIN field and Verify SIM PIN fields, enter the new PIN.
9. Click the Submit button.
10. Click the OK button.
Your settings are saved. Make sure that you write down your new PIN and store it in
a safe place.
Disable SIM Card Security
If you no longer need SIM card security, you can disable it.
WARNING: Be careful entering the SIM PIN multiple times because you can enter only
a limited number of incorrect PINs before the SIM card is blocked. The number of
allowed attempts depends on the SIM card. If the SIM card is blocked, you must obtain
a PIN unlock key (PUK) from your mobile broadband service provider to unblock the
PIN (see Unblock the SIM Card With a PUK on page 46).
To disable SIM card security:
1.
Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client
from a router that is connected to the modem.
2.
In the address field of your browser, enter http://192.168.5.1.
User Manual44Secure Your Network
NETGEAR 4G LTE Modem LM1200

NETGEAR LM1200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
4G standard	LTE
3G standards	HSPA+
Mobile network generation	4G
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), USB Type-C
Output current	2 A
Output voltage	5 V
Power consumption (typical)	- W
Product color	White
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	116 mm
Height	32.25 mm
Weight	180 g