EasyManuals Logo

NETGEAR LM1200 User Manual

NETGEAR LM1200
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Troubleshoot With the LEDs
The following table describes error conditions that are indicated by the LEDs.
Table 8. LED descriptions (error conditions)
DescriptionIcon or LEDDesignation
Solid amber. The modem is starting up.
Solid green. The modem is receiving power and is connected to the mobile broadband
network and the Internet.
Blinking amber. Device error. For more information, see Troubleshoot With the LEDs
on page 77.
Off. The modem is not receiving power.
Power
Solid amber. A device is connecting to the port.
Green. A device is connected to this port.
Ethernet
LAN
Solid amber. A device is connected to this port.
Solid green. Full data connectivity.
Ethernet
WAN
Green. The LTE connection is good. Blinking indicates data traffic.
Amber. The LTE connection is good, but the signal is weaker. Blinking indicates data
traffic.
Red. The modem can't connect to the LTE network.
Signal
Strength
Power LED Is Off
If the Power LED is off and other LEDs are also off when you turn on the modem,
do the following:
Check that the power On/Off button on the back is in the On position, that is, it is
pressed in.
Check that the power cord is correctly connected to your modem and that the power
supply adapter is correctly connected to a functioning power outlet.
Check that you are using the DC 5V, 2A power adapter that NETGEAR supplied for
this product.
If the error persists, most likely a hardware problem occurred. For recovery instructions
or help with a hardware problem, contact technical support at netgear.com/support.
User Manual77Alerts and Troubleshooting
NETGEAR 4G LTE Modem LM1200

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR LM1200 and is the answer not in the manual?

NETGEAR LM1200 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi band-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
4G standardLTE
3G standardsHSPA+
Mobile network generation4G
Ethernet LAN (RJ-45) ports1
Cables includedLAN (RJ-45), USB Type-C
Output current2 A
Output voltage5 V
Power consumption (typical)- W
Product colorWhite
Storage temperature (T-T)-25 - 55 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Width116 mm
Height32.25 mm
Weight180 g

Related product manuals