NETGEAR LM1200

Table 9. LM1200 modem factory default settings (Continued)
Default SettingsFeature
DisabledNAT
EnabledVPN pass-through
Technical and Environmental Specifications
Table 10. LM1200 modem specifications
DescriptionFeature
TCP/IP, DNS relay, NAT (many-to-one), TFTP client, VPN pass-through, DNSData and routing protocols
•
DC 5V, 2A
•
USB Type-C cable
Power adapter
4.56 by 4.56 by 1.27 in (116 x 116 x 32.25 mm)
0.39 lb (180g)
Dimensions and weight
•
LTE CAT 4 (Up to 150Mbps DL and 50Mbps UL):
B2/B4/B5/B12/B13/B14/B66/B71
•
UMTS DC-HSPA+ (Up to 42Mbps): B2/B4/B5
Band support
USB Type-CPower port
Two Gigabit Ethernet portsGigabit Ethernet ports
One Nano SIM slotSIM slot
Two TS-9 RF portsExternal antenna ports
0° to 40°C (32° to 104°F)Operating temperature
–25° to 55°C (–13° to 131°F)Storage temperature
90% maximum relative humidity, noncondensingOperating humidity
5–95% maximum relative humidity, noncondensingStorage humidity
User Manual85Default Settings and
Specifications
NETGEAR 4G LTE Modem LM1200