NETGEAR LM1200 User Manual

Introduction
The NETGEAR 4G LTE Modem LM1200, in this manual referred to as the modem, can
provide broadband data services to areas where wired Internet is not readily available
or is difficult, costly, or time-consuming to install. The modem uses existing 4G LTE
mobile networks with automatic fallback to 3G mobile networks to provide broadband
data services.
If you connect a WiFi router to the modem’s Gigabit Ethernet port, the mobile network
connection can provide high-speed Internet access for multiple users and devices in
homes and offices.
Alternatively, you can connect the modem to an existing DSL, cable, or fiber optics
gateway so that the modem can provide a backup Internet connection for your home
or office to achieve continuous connectivity.
Professional installation and configuration are not required. If a SIM card is installed
and activated, by default, the modem automatically searches for and connects to your
network provider’s mobile broadband network.
For information about installing the modem, see the quick start guide that came with
the device, and which you can download from downloadcenter.netgear.com.
In the unlikely situation that the modem does not automatically connect to your network
provider’s mobile broadband network, you might need to add an access profile name
(APN) profile. For information about adding an APN profile, see View APN Profiles or
Add a Custom APN Profile on page 22.
Supported Mobile Broadband Bands
The following table describes the mobile broadband bands that are supported for the
modem.
Table 1. Mobile broadband bands
2G GSM3G UMTSLTE Category 4Model
Not supportedBands 2, 4 and 5Bands 2, 4, 5, 12, 13, 14, 66,
and 71
LM1200-100NAS
Not supportedBands 2, 4 and 5Bands 2, 4, 5, 12, 13, 14, 66,
and 71
LM1200-200NAS
Not supportedBands 2, 4 and 5Bands 2, 4, 5, 12, 13, 14, 66,
and 71
LM1200-111NAS
User Manual7Introduction and Hardware
Overview
NETGEAR 4G LTE Modem LM1200

NETGEAR LM1200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
4G standard	LTE
3G standards	HSPA+
Mobile network generation	4G
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), USB Type-C
Output current	2 A
Output voltage	5 V
Power consumption (typical)	- W
Product color	White
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	116 mm
Height	32.25 mm
Weight	180 g