Use the Modem’s Web Pages to Reset the Modem to
Factory Defaults
CAUTION: This process erases all settings that you configured in the modem.
To reset the modem to factory default settings with the modem’s web pages:
1.
Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client
from a router that is connected to the modem.
2.
In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3.
Enter the modem password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
5.
Select Settings > General > Software and Reset.
6. In the Factory Reset section, click the Reset button.
The configuration is reset to factory default settings. When the restoration is complete,
the modem restarts.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the
restoration. For example, do not close the browser, click a link, or load a new page.
Do not turn off the modem.
View Monthly Data Usage
You can view an estimate of your data usage since the start of the billing cycle as well
as the data usage and time that passed since the modem connected to the mobile
broadband network in the current session.
User Manual53Manage the Modem and
Monitor Usage and the Network
NETGEAR 4G LTE Modem LM1200
To Next Page
Loading...
